Inside Our Multifamily Flat Roofing Project at 517 Main Street

When a multifamily apartment building needs a new roof, the stakes go beyond keeping water out—the work has to protect residents, improve building-wide energy efficiency, and run smoothly without disrupting daily life on an occupied property. Recently, our Englund Roofing crew completed a major multifamily flat roof replacement at 517 Main Street in Hopkins, MN. What started as an aging flat roof with standing water puddles turned into a complete, deck-up structural and thermal overhaul built to protect the building and its tenants for decades to come.

60-mil EPDM Ballast Roofing System Hopkins MN

This Hopkins Flat Roofing Project At-a-Glance

  • Property Type: Occupied Multifamily Apartment Building
  • Location: 517 Main Street, Hopkins, MN
  • Removal Scope: Full double tear-off (aging EPDM ballast roof + legacy built-up “hot roof”) down to the bare structural cement deck
  • Insulation Upgrade: Custom tapered polyiso insulation system averaging R-30
  • New Roofing System: Heavy-duty 60-mil EPDM ballast roofing system

Out with the Old: A Double Tear-Off on an Occupied Apartment Building

A reliable multifamily roof starts with a clean structural foundation. At 517 Main Street, the apartment building had an aging EPDM ballast roofing system that had reached the end of its service life—and lurking directly beneath it was a second, heavy legacy “hot roof” (built-up roofing) system.

Rather than layering new materials over trapped moisture and dead weight, our crew executed a complete double tear-off of both roofing systems all the way down to the bare structural cement roof deck. Working on an occupied apartment building along Hopkins’ Main Street corridor required strict safety staging, clean debris handling, and clear coordination so residents could come and go safely throughout tear-off. Stripping down to the bare cement deck allowed us to verify the structural integrity of the roof deck before building back up.

Multifamily Flat Roof Replacement Hopkins MN

Eliminating Ponding Water & Cutting Utility Costs with R-30 Tapered Insulation

Once the cement deck was exposed, cleaned, and prepped, we addressed two critical priorities for apartment owners and property managers: drainage and heating/cooling efficiency.

Older flat apartment roofs frequently develop low spots that hold standing water after rain or spring snowmelt. To solve that permanently, we installed a custom tapered insulation system engineered to direct water cleanly toward the building’s roof drains.

At the same time, the new insulation package raised the roof’s thermal performance to an average R-30 insulation value. For a multifamily building in Minnesota, upgrading to R-30 dramatically reduces heat loss in the winter and keeps upper-floor apartments cooler in the summer—lowering HVAC strain and utility expenses year-round.

Built to Last: The 60-Mil EPDM Ballast System

With a properly sloped, R-30 insulated base in place, we installed a heavy-duty 60-mil EPDM ballast roofing system engineered for long-term commercial and multifamily performance:

  • 60-Mil Membrane Durability: At 60 thousandths of an inch thick, reinforced EPDM synthetic rubber resists tears, hail, punctures, and extreme Minnesota freeze-thaw cycles without becoming brittle.
  • Wind & UV Protection with River Rock Ballast: Finishing the membrane with washed river rock ballast locks the roof system down against high winds while shielding the rubber membrane from UV exposure and physical wear.
  • Low Long-Term Maintenance: Property managers benefit from a clean, dependable flat roof system designed for decades of service with straightforward seasonal inspections.

Multifamily Roofing Done Right by Englund Roofing

The transformation at 517 Main Street in Hopkins demonstrates how Englund Roofing approaches multifamily and apartment roofing across the Twin Cities: no shortcuts, thorough tear-offs to the deck, and energy-smart systems installed with occupied residents in mind.

Manage an apartment building, condo association, or multifamily property in Hopkins or the Twin Cities? Contact Englund Roofing Online or at (651) 917-7663 to schedule a thorough roof evaluation and replacement assessment.

Frequently Asked Questions: Multifamily Flat Roof Replacement in Hopkins, MN

Can you tear off and replace an apartment building roof while tenants are living inside?

Yes. Experienced commercial crews routinely perform full tear-offs—even multi-layer removals down to a bare cement deck—on occupied multifamily apartment buildings without displacing residents. By staging perimeter safety zones, coordinating crane and debris-chute schedules, and waterproofing sections daily before moving on, the building stays dry and residents can enter and exit safely throughout the project.

What R-value is required for flat apartment roofs in Hopkins and the Twin Cities?

Under the Minnesota Commercial Energy Code for Climate Zone 6 (which includes Hopkins and the Twin Cities metro), commercial and multifamily roofs with insulation installed entirely above the roof deck require a minimum of R-30 continuous insulation. Using a custom tapered polyiso insulation system that averages R-30 not only brings an older apartment building up to current Minnesota energy code, but also creates positive slope to eliminate ponding water and lower building-wide heating and cooling costs.

Why is a 60-mil EPDM ballast system a strong choice for multifamily apartment buildings?

A 60-mil reinforced EPDM membrane provides thick, flexible protection against hail, punctures, and extreme Minnesota freeze-thaw cycles. Topping the membrane with washed river rock ballast locks the roof system down against high winds without penetrating the deck, shields the rubber from UV degradation, and delivers a quiet, low-maintenance roof built to last decades.